Service area
Fireplace installation in Independence, MO
Blue Springs Fireplaces installs gas inserts, gas logs, conversions and liners in Independence homes from our base in Blue Springs, with prices published before we ever walk in.
Independence has the oldest fireplaces we work on. A brick ranch near the Truman Home or a two story in the streets behind Englewood usually has a full masonry chimney with clay tile liners set in the 1950s or 1960s. By now the mortar joints between those tiles have opened up, a tile or two has cracked from a chimney fire nobody noticed, and the damper plate has rusted to the point that it barely moves.
The right order of work in a house like that is inspection, liner, then appliance. A Level 2 camera inspection shows us the condition of the flue. A stainless steel liner, insulated and sized to the appliance, restores a safe path for exhaust and runs $1,800 to $4,000. After that, the homeowner picks between a vented gas log set for the look of a wood fire at the lowest price, or a direct vent gas insert that actually heats the room.
Independence owners tend to be value conscious, and the published price table is what gets us the call. Gas logs installed start at $900 and a complete insert conversion with the liner sits around $5,500 to $9,000 for a typical masonry fireplace on the east side of town. Blue Springs Fireplaces reaches most of Independence in under twenty minutes on I-70 or Highway 40.
What 60 year old chimneys hide
Older Independence chimneys were often built without a cap or with the original clay crown, and water has been getting in for decades. If the inspection shows spalled brick or a sagging crown, that masonry repair comes before any liner, and we tell you so in the quote rather than discovering it on install day.
Independence neighborhoods on our route
We work throughout Independence (64050, 64052, 64053, 64055, 64056, 64057, 64058), including around the Truman Home area, Englewood, the Santa Fe Trail neighborhoods, Bass Pro at 39th and I-70, the Sermon Center and Sugar Creek. The jobs Independence homeowners call about most: gas inserts, gas log sets, wood to gas conversions and chimney liners. The permit guide covers the Independence inspection office.
Questions from Independence homeowners
My Independence chimney has cracked clay tiles. Can I still add gas logs?
Vented gas logs still need a working flue, so cracked tiles mean a stainless liner first. Vent free logs do not use the chimney at all and can be an option if the room size allows, but we discuss the tradeoffs before recommending them.
How much is a chimney liner in Independence?
A flexible insulated stainless liner runs $1,800 to $4,000 per flue depending on height, diameter and offsets. Most two story Independence homes land in the middle of that range.
Is a gas insert worth it in an older masonry fireplace?
If you want heat, yes. An open masonry fireplace sends most of its warmth up the flue; a sealed direct vent insert returns 70 percent or more of it to the room and shuts the cold draft off when it is not running.
Who pulls the permit in Independence?
We do. Independence Community Development issues mechanical permits for gas appliances and gas piping, and the inspection covers the gas line, the vent and clearances.
Can you work on a fireplace in Sugar Creek?
Yes. Sugar Creek runs its own permits but the housing is the same era as north Independence, and we treat it as part of the Independence route.
Written pricing for Independence fireplaces
Or call (816) 683-3118 and talk it through.
Nearby areas we also cover: Lake Lotawana · Raytown · Lone Jack